LightGuard Lite Installation
These fasteners will work with the LightGuard bracket but only if the finishing washer is not installed on the top taillight fastener. The Finishing Washers MAY NOT sit...
Read moreInstallation
LightGuard Installation
If you bought the TailGuard as well, INSTALL IT FIRST. Otherwise you will be removing the LightGuard when you go to install the TailGuard!
Read moreSTG Installation
WARNING: DO NOT USE THESE BRACKETS ON A WEIGHT-BEARING TAILGATE. Installation of both brackets is highly recommended. Each STG kit comes with two thick plastic spacers, four thin plastic spacers,...
Read moreHoodGuard Installation
Take your time. Go slow so if you do bump into the springs trying to place the bolt through the hole, it won't fall off the Allen wrench....
Read moreTailGuard Installation
Information about the hardware: custom-size and thickness washers were needed to ensure maximum contact with the back of the bed post while not encroaching on any of the...
Read moreFord F250 + F350 Part Numbers
Looking p/n's up sucks. This page is for me to keep track of various numbers so I and yall have a place to look them up. These are...
Read more
