{"title":"sPOD - BantamX Touchscreen","description":"\u003cp\u003eBantamX systems with the integrated touchscreen control panel.\u003c\/p\u003e","products":[{"product_id":"bantamx-touchscreen-jeep-jl-jt","title":"BantamX Touchscreen - Jeep JL\/JT","description":"\u003cp\u003eThe BantamX will save hours of wiring and installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12\/24VDC accessories.\u003c\/p\u003e\u003cp\u003eDue to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle's electrical system. It's the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e JL\/JT with a diesel engine requires a special bracket.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFully programmable, digital controlled system\u003c\/li\u003e\n\u003cli\u003e8 circuits rated at 30 amps at 12.5 VDC per circuit\u003c\/li\u003e\n\u003cli\u003e16-position terminal block (easily attach accessories)\u003c\/li\u003e\n\u003cli\u003e2 controller ports (RJ45) for Ethernet cables\u003c\/li\u003e\n\u003cli\u003eIntegrated low voltage cutoff (LVCO) battery protection w\/ optional override\u003c\/li\u003e\n\u003cli\u003eOne ATM mini-style fuse for LVCO protection and reset\u003c\/li\u003e\n\u003cli\u003eFailsafe self-healing fault protection system (from 1.5 to 30amps)\u003c\/li\u003e\n\u003cli\u003eCurrent-sensing MOSFETs controlled by a microprocessor (no fuses and relays)\u003c\/li\u003e\n\u003cli\u003e50amp auto-resetting circuit breaker\u003c\/li\u003e\n\u003cli\u003eNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket\u003c\/li\u003e\n\u003cli\u003eOperates on 12VDC or 24VDC\u003c\/li\u003e\n\u003cli\u003e8-position input terminal block for controlling outputs\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth capabilities for remote control\u003c\/li\u003e\n\u003cli\u003eProtection against: overheating, over-current, shorts, reverse polarity and field collapse\u003c\/li\u003e\n\u003cli\u003eIgnition control and safety lock-out for switches 1 and 2 (optional)\u003c\/li\u003e\n\u003cli\u003eUp to 4 BantamX units can be daisy chained and controlled by one Touchscreen\u003c\/li\u003e\n\u003cli\u003eOn-demand wireless software updates\/upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eHardware:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePowder coated steel base w\/ built in hardware\u003c\/li\u003e\n\u003cli\u003eSilicone gasket for weatherproofing\u003c\/li\u003e\n\u003cli\u003eSimple thumb screw fastening aluminum lid with convenient silkscreened outlines for supplied legend placement\u003c\/li\u003e\n\u003cli\u003eUniversal and vehicle specific mounting options\u003c\/li\u003e\n\u003cli\u003eRobust insulated base and cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures Available Through sPOD Mobile App (free):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEach switch can be programmed for:\u003c\/li\u003e\n\u003cli\u003eDimming\u003c\/li\u003e\n\u003cli\u003eStrobe\u003c\/li\u003e\n\u003cli\u003eFlash\u003c\/li\u003e\n\u003cli\u003eMomentary\u003c\/li\u003e\n\u003cli\u003eSwitch Linking\u003c\/li\u003e\n\u003cli\u003eOn Road and Off Road mode of operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThe following features are only available through the purchase of our Pro-Series mobile App:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCircuit timers\u003c\/li\u003e\n\u003cli\u003eSwitch lockout\u003c\/li\u003e\n\u003cli\u003eInitial startup current for each circuit is raised to 65amps for 5 seconds\u003c\/li\u003e\n\u003cli\u003eProgram any circuit to be always on while still maintaining fault protection\u003c\/li\u003e\n\u003cli\u003eOption to disable deep sleep mode\u003c\/li\u003e\n\u003cli\u003eSelectable auto restart after circuit shuts down from over current\/short\u003c\/li\u003e\n\u003cli\u003eProgrammable Current Limiting (in 2amp increments up to 30amps)\u003c\/li\u003e\n\u003cli\u003eSelectable auto restart for current limiting shut down\u003c\/li\u003e\n\u003cli\u003eSelectable Latch or Momentary actions for inputs\u003c\/li\u003e\n\u003cli\u003eProgrammable ignition control for all 8 circuits\u003c\/li\u003e\n\u003cli\u003eVariable strobe function to create custom flash\/strobe patterns\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eExternal Controller Options (not included with system and can only be used in conjunction with an sPOD controller):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThird party switches\u003c\/li\u003e\n\u003cli\u003eComputers\u003c\/li\u003e\n\u003cli\u003eArduino\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi\u003c\/li\u003e\n\u003cli\u003eAlpine Audio systems KAC-001 head unit controller\u003c\/li\u003e\n\u003cli\u003eSensors, thermostats, pressure switches, fan controllers and more\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTouchscreen Control Panel\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eTouchscreen Benefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReduced installation time and labor allowing for mounting and connection of eight switches at one time versus individually.\u003c\/li\u003e\n\u003cli\u003eReduced wire harness complexity, using one harness to our controller to accommodate up to 32 circuits.\u003c\/li\u003e\n\u003cli\u003eReduced harness size offers an overall reduction in weight, improving the operational efficiency of the equipment.\u003c\/li\u003e\n\u003cli\u003eIncrease in switch lifecycle over traditional electromechanical switches.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTouchscreen Control Module Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVoltage feedback (vehicles battery\/alternator voltage)\u003c\/li\u003e\n\u003cli\u003eAmperage meter for each switch gives you the status of how much current each accessory is drawing\u003c\/li\u003e\n\u003cli\u003eBoard temperature feedback (shown on screen)\u003c\/li\u003e\n\u003cli\u003eCustomization: legends (3 lines of text)\u003c\/li\u003e\n\u003cli\u003eAutomatic backlighting off after 30 minutes of being inactivity\u003c\/li\u003e\n\u003cli\u003eAutomatic power off after 6 hours of being inactive or engine not running (Deep sleep mode)\u003c\/li\u003e\n\u003cli\u003eOne touch off function\u003c\/li\u003e\n\u003cli\u003eOne second hold on off button shuts all circuits down\u003c\/li\u003e\n\u003cli\u003eAutomatic system shut down when the touchscreen is unplugged\u003c\/li\u003e\n\u003cli\u003eBacklight dimming\u003c\/li\u003e\n\u003cli\u003eMultiple Source select (One touchscreen can control up to 32 circuits)\u003c\/li\u003e\n\u003cli\u003eCome with its own mounting bracket.\u003c\/li\u003e\n\u003cli\u003eBluetooth for use in programming the touchscreen.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe primary reason for the Bluetooth integrated into the Touchscreen is for programming purposes, and not for remote control due to the limited range.\u003c\/li\u003e\n\u003cli\u003eTouchscreen housings are precision machined billet aluminum which contributes to the distance limitations.\u003c\/li\u003e\n\u003cli\u003eRanges may vary from 5 feet up to 15 feet depending on the location of the Touchscreen, the surroundings, phone type, phone cover, and many other variables.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAdditional Touchscreen Mounting Options (sold separately):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRAM-201U Double Socket Arm for 1-inch RAM Ball (Must have this in order to mount touchscreen)\u003c\/li\u003e\n\u003cli\u003eRAM-238U Base with 1-inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)\u003c\/li\u003e\n\u003cli\u003eRAM-224-1U Suction Cup Base with 1-inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":53502664212664,"sku":"870040-GNJV","price":930.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/4053\/5992\/files\/GNJV_870040-IMG_010_P05_ANG_A__28789.1745532243.386.513.png?v=1780424236"},{"product_id":"bantamx-touchscreen-jeep-2007-2018-wrangler-jk","title":"BantamX Touchscreen for JK 2007-2018","description":"\u003cp\u003eThe BantamX will save hours of wiring and installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12\/24VDC accessories.\u003c\/p\u003e\u003cp\u003eDue to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle's electrical system. It's the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFully programmable, digital controlled system\u003c\/li\u003e\n\u003cli\u003e8 circuits rated at 30 amps at 12.5 VDC per circuit\u003c\/li\u003e\n\u003cli\u003e16-position terminal block (easily attach accessories)\u003c\/li\u003e\n\u003cli\u003e2 controller ports (RJ45) for Ethernet cables\u003c\/li\u003e\n\u003cli\u003eIntegrated low voltage cutoff (LVCO) battery protection w\/ optional override\u003c\/li\u003e\n\u003cli\u003eOne ATM mini-style fuse for LVCO protection and reset\u003c\/li\u003e\n\u003cli\u003eFailsafe self-healing fault protection system (from 1.5 to 30amps)\u003c\/li\u003e\n\u003cli\u003eCurrent-sensing MOSFETs controlled by a microprocessor (no fuses and relays)\u003c\/li\u003e\n\u003cli\u003e50amp auto-resetting circuit breaker\u003c\/li\u003e\n\u003cli\u003eNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket\u003c\/li\u003e\n\u003cli\u003eOperates on 12VDC or 24VDC\u003c\/li\u003e\n\u003cli\u003e8-position input terminal block for controlling outputs\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth capabilities for remote control\u003c\/li\u003e\n\u003cli\u003eProtection against: overheating, over-current, shorts, reverse polarity and field collapse\u003c\/li\u003e\n\u003cli\u003eIgnition control and safety lock-out for switches 1 and 2 (optional)\u003c\/li\u003e\n\u003cli\u003eUp to 4 BantamX units can be daisy chained and controlled by one Touchscreen\u003c\/li\u003e\n\u003cli\u003eOn-demand wireless software updates\/upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eHardware:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePowder coated steel base w\/ built in hardware\u003c\/li\u003e\n\u003cli\u003eSilicone gasket for weatherproofing\u003c\/li\u003e\n\u003cli\u003eSimple thumb screw fastening aluminum lid with convenient silkscreened outlines for supplied legend placement\u003c\/li\u003e\n\u003cli\u003eUniversal and vehicle specific mounting options\u003c\/li\u003e\n\u003cli\u003eRobust insulated base and cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures Available Through sPOD Mobile App (free):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEach switch can be programmed for:\u003c\/li\u003e\n\u003cli\u003eDimming\u003c\/li\u003e\n\u003cli\u003eStrobe\u003c\/li\u003e\n\u003cli\u003eFlash\u003c\/li\u003e\n\u003cli\u003eMomentary\u003c\/li\u003e\n\u003cli\u003eSwitch Linking\u003c\/li\u003e\n\u003cli\u003eOn Road and Off Road mode of operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThe following features are only available through the purchase of our Pro-Series mobile App:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCircuit timers\u003c\/li\u003e\n\u003cli\u003eSwitch lockout\u003c\/li\u003e\n\u003cli\u003eInitial startup current for each circuit is raised to 65amps for 5 seconds\u003c\/li\u003e\n\u003cli\u003eProgram any circuit to be always on while still maintaining fault protection\u003c\/li\u003e\n\u003cli\u003eOption to disable deep sleep mode\u003c\/li\u003e\n\u003cli\u003eSelectable auto restart after circuit shuts down from over current\/short\u003c\/li\u003e\n\u003cli\u003eProgrammable Current Limiting (in 2amp increments up to 30amps)\u003c\/li\u003e\n\u003cli\u003eSelectable auto restart for current limiting shut down\u003c\/li\u003e\n\u003cli\u003eSelectable Latch or Momentary actions for inputs\u003c\/li\u003e\n\u003cli\u003eProgrammable ignition control for all 8 circuits\u003c\/li\u003e\n\u003cli\u003eVariable strobe function to create custom flash\/strobe patterns\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eExternal Controller Options (not included with system and can only be used in conjunction with an sPOD controller):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThird party switches\u003c\/li\u003e\n\u003cli\u003eComputers\u003c\/li\u003e\n\u003cli\u003eArduino\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi\u003c\/li\u003e\n\u003cli\u003eAlpine Audio systems KAC-001 head unit controller\u003c\/li\u003e\n\u003cli\u003eSensors, thermostats, pressure switches, fan controllers and more\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTouchscreen Control Panel\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eTouchscreen Benefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReduced installation time and labor allowing for mounting and connection of eight switches at one time versus individually.\u003c\/li\u003e\n\u003cli\u003eReduced wire harness complexity, using one harness to our controller to accommodate up to 32 circuits.\u003c\/li\u003e\n\u003cli\u003eReduced harness size offers an overall reduction in weight, improving the operational efficiency of the equipment.\u003c\/li\u003e\n\u003cli\u003eIncrease in switch lifecycle over traditional electromechanical switches.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTouchscreen Control Module Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVoltage feedback (vehicles battery\/alternator voltage)\u003c\/li\u003e\n\u003cli\u003eAmperage meter for each switch gives you the status of how much current each accessory is drawing\u003c\/li\u003e\n\u003cli\u003eBoard temperature feedback (shown on screen)\u003c\/li\u003e\n\u003cli\u003eCustomization: legends (3 lines of text)\u003c\/li\u003e\n\u003cli\u003eAutomatic backlighting off after 30 minutes of being inactivity\u003c\/li\u003e\n\u003cli\u003eAutomatic power off after 6 hours of being inactive or engine not running (Deep sleep mode)\u003c\/li\u003e\n\u003cli\u003eOne touch off function\u003c\/li\u003e\n\u003cli\u003eOne second hold on off button shuts all circuits down\u003c\/li\u003e\n\u003cli\u003eAutomatic system shut down when the touchscreen is unplugged\u003c\/li\u003e\n\u003cli\u003eBacklight dimming\u003c\/li\u003e\n\u003cli\u003eMultiple Source select (One touchscreen can control up to 32 circuits)\u003c\/li\u003e\n\u003cli\u003eCome with its own mounting bracket.\u003c\/li\u003e\n\u003cli\u003eBluetooth for use in programming the touchscreen.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe primary reason for the Bluetooth integrated into the Touchscreen is for programming purposes, and not for remote control due to the limited range.\u003c\/li\u003e\n\u003cli\u003eTouchscreen housings are precision machined billet aluminum which contributes to the distance limitations.\u003c\/li\u003e\n\u003cli\u003eRanges may vary from 5 feet up to 15 feet depending on the location of the Touchscreen, the surroundings, phone type, phone cover, and many other variables.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAdditional Touchscreen Mounting Options (sold separately):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRAM-201U Double Socket Arm for 1-inch RAM Ball (Must have this in order to mount touchscreen)\u003c\/li\u003e\n\u003cli\u003eRAM-238U Base with 1-inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)\u003c\/li\u003e\n\u003cli\u003eRAM-224-1U Suction Cup Base with 1-inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":53502672437432,"sku":"870035-GNJV","price":930.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/4053\/5992\/files\/870035_5-GNJV.jpg?v=1780592292"},{"product_id":"bantamx-touchscreen-jeep-jl-v8","title":"BantamX Touchscreen for Jeep JL V8 sPOD","description":"\u003cp\u003eThe BantamX will save hours of wiring and installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12\/24VDC accessories.\u003c\/p\u003e\u003cp\u003eDue to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle's electrical system. It's the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFully programmable, digital controlled system\u003c\/li\u003e\n\u003cli\u003e8 circuits rated at 30 amps at 12.5 VDC per circuit\u003c\/li\u003e\n\u003cli\u003e16-position terminal block (easily attach accessories)\u003c\/li\u003e\n\u003cli\u003e2 controller ports (RJ45) for Ethernet cables\u003c\/li\u003e\n\u003cli\u003eIntegrated low voltage cutoff (LVCO) battery protection w\/ optional override\u003c\/li\u003e\n\u003cli\u003eOne ATM mini-style fuse for LVCO protection and reset\u003c\/li\u003e\n\u003cli\u003eFailsafe self-healing fault protection system (from 1.5 to 30amps)\u003c\/li\u003e\n\u003cli\u003eCurrent-sensing MOSFETs controlled by a microprocessor (no fuses and relays)\u003c\/li\u003e\n\u003cli\u003e100amp in-line fuse\u003c\/li\u003e\n\u003cli\u003eNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket\u003c\/li\u003e\n\u003cli\u003eOperates on 12VDC or 24VDC\u003c\/li\u003e\n\u003cli\u003e8-position input terminal block for controlling outputs\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth capabilities for remote control\u003c\/li\u003e\n\u003cli\u003eProtection against: overheating, over-current, shorts, reverse polarity and field collapse\u003c\/li\u003e\n\u003cli\u003eIgnition control and safety lock-out for switches 1 and 2 (optional)\u003c\/li\u003e\n\u003cli\u003eUp to 4 BantamX units can be daisy chained and controlled by one Touchscreen\u003c\/li\u003e\n\u003cli\u003eOn-demand wireless software updates\/upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eHardware:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePowder coated steel base w\/ built in hardware\u003c\/li\u003e\n\u003cli\u003eSilicone gasket for weatherproofing\u003c\/li\u003e\n\u003cli\u003eSimple thumb screw fastening aluminum lid with convenient silkscreened outlines for supplied legend placement\u003c\/li\u003e\n\u003cli\u003eUniversal and vehicle specific mounting options\u003c\/li\u003e\n\u003cli\u003eRobust insulated base and cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures Available Through sPOD Mobile App (Free):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eEach switch can be programmed for:\u003cul\u003e\n\u003cli\u003eDimming\u003c\/li\u003e\n\u003cli\u003eStrobe\u003c\/li\u003e\n\u003cli\u003eFlash\u003c\/li\u003e\n\u003cli\u003eMomentary\u003c\/li\u003e\n\u003cli\u003eSwitch Linking\u003c\/li\u003e\n\u003cli\u003eOn Road and Off Road mode of operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThe following features are only available through the purchase of our Pro-Series mobile App:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCircuit timers\u003c\/li\u003e\n\u003cli\u003eSwitch lockout\u003c\/li\u003e\n\u003cli\u003eInitial startup current for each circuit is raised to 65amps for 5 seconds\u003c\/li\u003e\n\u003cli\u003eProgram any circuit to be always on while still maintaining fault protection\u003c\/li\u003e\n\u003cli\u003eOption to disable deep sleep mode\u003c\/li\u003e\n\u003cli\u003eSelectable auto restart after circuit shuts down from over current\/short\u003c\/li\u003e\n\u003cli\u003eProgrammable Current Limiting (in 2amp increments up to 30amps)\u003c\/li\u003e\n\u003cli\u003eSelectable auto restart for current limiting shut down\u003c\/li\u003e\n\u003cli\u003eSelectable Latch or Momentary actions for inputs\u003c\/li\u003e\n\u003cli\u003eProgrammable ignition control for all 8 circuits\u003c\/li\u003e\n\u003cli\u003eVariable strobe function to create custom flash\/strobe patterns\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eExternal Controller Options (not included with system and can only be used in conjunction with an sPOD controller):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThird party switches\u003c\/li\u003e\n\u003cli\u003eComputers\u003c\/li\u003e\n\u003cli\u003eArduino\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi\u003c\/li\u003e\n\u003cli\u003eAlpine Audio systems KAC-001 head unit controller\u003c\/li\u003e\n\u003cli\u003eSensors, thermostats, pressure switches, fan controllers and more\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTouchscreen Control Panel\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe touchscreen display will become inoperable if ambient temperatures drop below 20 degrees F.\u003c\/li\u003e\n\u003cli\u003eLet the temperature of the cab of the vehicle warm up before operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTouchscreen Benefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReduced installation time and labor allowing for mounting and connection of eight switches at one time versus individually.\u003c\/li\u003e\n\u003cli\u003eReduced wire harness complexity, using one harness to our controller to accommodate up to 32 circuits.\u003c\/li\u003e\n\u003cli\u003eReduced harness size offers an overall reduction in weight, improving the operational efficiency of the equipment.\u003c\/li\u003e\n\u003cli\u003eIncrease in switch lifecycle over traditional electromechanical switches.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTouchscreen Control Module Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVoltage feedback (vehicles battery\/alternator voltage)\u003c\/li\u003e\n\u003cli\u003eAmperage meter for each switch gives you the status of how much current each accessory is drawing\u003c\/li\u003e\n\u003cli\u003eBoard temperature feedback (shown on screen)\u003c\/li\u003e\n\u003cli\u003eCustomization: legends (3 lines of text)\u003c\/li\u003e\n\u003cli\u003eAutomatic backlighting off after 30 minutes of being inactivity\u003c\/li\u003e\n\u003cli\u003eAutomatic power off after 6 hours of being inactive or engine not running (Deep sleep mode)\u003c\/li\u003e\n\u003cli\u003eOne touch off function\u003c\/li\u003e\n\u003cli\u003eOne second hold on off button shuts all circuits down\u003c\/li\u003e\n\u003cli\u003eAutomatic system shut down when the touchscreen is unplugged\u003c\/li\u003e\n\u003cli\u003eBacklight dimming\u003c\/li\u003e\n\u003cli\u003eMultiple Source select (One touchscreen can control up to 32 circuits)\u003c\/li\u003e\n\u003cli\u003eCome with its own mounting bracket.\u003c\/li\u003e\n\u003cli\u003eBluetooth for use in programming the touchscreen.- The primary reason for the Bluetooth integrated into the Touchscreen is for programming purposes, and not for remote control due to the limited range. Touchscreen housings are precision machined billet aluminum which contributes to the distance limitations. Ranges may vary from 5 feet up to 15 feet depending on the location of the Touchscreen, the surroundings, phone type, phone cover, and many other variables.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":53502673354936,"sku":"870045-GNJV","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/4053\/5992\/files\/870045-GNJV.png?v=1780592309"},{"product_id":"touchscreen-bantamx-vehicle-kit-ford-2021-2026-f-150-2021-2026-f-150-raptor-2024-2026-f-150-raptor-37-r","title":"Touchscreen BantamX Vehicle Kit - Ford 2021-On F-150; F-150 Raptor sPOD","description":"\u003cp\u003esPOD BantamX Touchscreen vehicle-specific kit for Ford F150 (21-on) and Ford F-150 Raptor (21-on) has been designed specifically to integrate the sPOD Touchscreen panel into your cabin seamlessly while providing a safe place to access all your controls. Designed to replace the in-cab sunglass holder, our plate has been specifically designed at the perfect angle to access switches easily.\u003c\/p\u003e\u003cp\u003eThe BantamX will save hours of wiring and installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12\/24VDC accessories. Due to the small footprint of the BantamX, the placement options are endless!\u003c\/p\u003e\u003cp\u003eNo cutting, fishing wires into the cab or tapping into the vehicle's electrical system. It's the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFully programmable, digital controlled system\u003c\/li\u003e\n\u003cli\u003e8 circuits rated at 30 amps at 12.5 VDC per circuit\u003c\/li\u003e\n\u003cli\u003e16-position terminal block (easily attach accessories)\u003c\/li\u003e\n\u003cli\u003e2 controller ports (RJ45) for Ethernet cables\u003c\/li\u003e\n\u003cli\u003eIntegrated low voltage cutoff (LVCO) battery protection w\/ optional override\u003c\/li\u003e\n\u003cli\u003eOne ATM mini-style fuse for LVCO protection and reset\u003c\/li\u003e\n\u003cli\u003eFailsafe self-healing fault protection system (from 1.5 to 30amps)\u003c\/li\u003e\n\u003cli\u003eCurrent-sensing MOSFETs controlled by a microprocessor (no fuses and relays)\u003c\/li\u003e\n\u003cli\u003e100amp fuse\u003c\/li\u003e\n\u003cli\u003eNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket\u003c\/li\u003e\n\u003cli\u003eOperates on 12VDC or 24VDC\u003c\/li\u003e\n\u003cli\u003e8-position input terminal block for controlling outputs\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth capabilities for remote control\u003c\/li\u003e\n\u003cli\u003eProtection against: overheating, over-current, shorts, reverse polarity and field collapse\u003c\/li\u003e\n\u003cli\u003eIgnition control and safety lock-out for switches 1 and 2 (optional)\u003c\/li\u003e\n\u003cli\u003eUp to 4 BantamX units can be daisy chained and controlled by one Touchscreen\u003c\/li\u003e\n\u003cli\u003eOn-demand wireless software updates\/upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eHardware:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePowder-coated steel base w\/ built in hardware\u003c\/li\u003e\n\u003cli\u003eSilicone gasket for weatherproofing\u003c\/li\u003e\n\u003cli\u003eSimple thumb screw fastening aluminum lid with convenient silkscreened outlines for supplied legend placement\u003c\/li\u003e\n\u003cli\u003eUniversal and vehicle specific mounting options\u003c\/li\u003e\n\u003cli\u003eRobust insulated base and cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures Available Through sPOD Mobile App (free):\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEach switch can be programmed for:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDimming\u003c\/li\u003e\n\u003cli\u003eStrobe\u003c\/li\u003e\n\u003cli\u003eFlash\u003c\/li\u003e\n\u003cli\u003eMomentary\u003c\/li\u003e\n\u003cli\u003eSwitch Linking\u003c\/li\u003e\n\u003cli\u003eOn Road and Off Road modes of operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThe following features are only available through the purchase of our Pro-Series mobile App:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCircuit timers\u003c\/li\u003e\n\u003cli\u003eSwitch lockout\u003c\/li\u003e\n\u003cli\u003eInitial startup current for each circuit is raised to 65amps for 5 seconds\u003c\/li\u003e\n\u003cli\u003eProgram any circuit to be always on while still maintaining fault protection\u003c\/li\u003e\n\u003cli\u003eOption to disable deep sleep mode\u003c\/li\u003e\n\u003cli\u003eSelectable auto restart after circuit shuts down from over current\/short\u003c\/li\u003e\n\u003cli\u003eProgrammable Current Limiting (in 2amp increments up to 30amps)\u003c\/li\u003e\n\u003cli\u003eSelectable auto restart for current limiting shutdown\u003c\/li\u003e\n\u003cli\u003eSelectable Latch or Momentary actions for inputs\u003c\/li\u003e\n\u003cli\u003eProgrammable ignition control for all 8 circuits\u003c\/li\u003e\n\u003cli\u003eVariable strobe function to create custom flash\/strobe patterns\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eExternal Controller Options:\u003c\/strong\u003e (not included with the system and can only be used in conjunction with an sPOD controller)\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThird-party switches\u003c\/li\u003e\n\u003cli\u003eComputers\u003c\/li\u003e\n\u003cli\u003eArduino\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi\u003c\/li\u003e\n\u003cli\u003eAlpine Audio systems KAC-001 head unit controller\u003c\/li\u003e\n\u003cli\u003eSensors, thermostats, pressure switches, fan controllers and more\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTouchscreen Control Panel:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe touchscreen display will become inoperable if ambient temperatures drop below 20 degrees F. Let the temperature of the cab of the vehicle warm up before the operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTouchscreen Benefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReduced installation time and labor allowing for mounting and connection of eight switches at one time versus individually.\u003c\/li\u003e\n\u003cli\u003eReduced wire harness complexity, using one harness to our controller to accommodate up to 32 circuits.\u003c\/li\u003e\n\u003cli\u003eReduced harness size offers an overall reduction in weight, improving the operational efficiency of the equipment.\u003c\/li\u003e\n\u003cli\u003eIncrease in switch lifecycle over traditional electromechanical switches.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTouchscreen Control Module Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVoltage feedback (vehicles battery\/alternator voltage)\u003c\/li\u003e\n\u003cli\u003eAmperage meter for each switch gives you the status of how much current each accessory is drawing\u003c\/li\u003e\n\u003cli\u003eBoard temperature feedback (shown on screen)\u003c\/li\u003e\n\u003cli\u003eCustomization: legends (3 lines of text)\u003c\/li\u003e\n\u003cli\u003eAutomatic backlighting off after 30 minutes of being inactivity\u003c\/li\u003e\n\u003cli\u003eAutomatic power off after 6 hours of being inactive or engine not running (Deep sleep mode)\u003c\/li\u003e\n\u003cli\u003eOne touch-off function\u003c\/li\u003e\n\u003cli\u003eOne second hold on off button shuts all circuits down\u003c\/li\u003e\n\u003cli\u003eAutomatic system shut down when the touchscreen is unplugged\u003c\/li\u003e\n\u003cli\u003eBacklight dimming\u003c\/li\u003e\n\u003cli\u003eMultiple Source select (One touchscreen can control up to 32 circuits)\u003c\/li\u003e\n\u003cli\u003eCome with its own mounting bracket.\u003c\/li\u003e\n\u003cli\u003eBluetooth for use in programming the touchscreen.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The primary reason for the Bluetooth integrated into the Touchscreen is for programming purposes, and not for remote control due to the limited range. Touchscreen housings are precision machined billet aluminum which contributes to the distance limitations. Ranges may vary from 5 feet up to 15 feet depending on the location of the Touchscreen, the surroundings, phone type, phone cover, and many other variables.\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":53502674108600,"sku":"870086-GNJV","price":1199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/4053\/5992\/files\/870086-GNJV.jpg?v=1780592319"},{"product_id":"spod-bantamx-touchscreen-universal","title":"BantamX Touchscreen for Uni with 84 Inch battery cables","description":"\u003cp\u003eThe BantamX will save hours of wiring and installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12\/24VDC accessories.\u003c\/p\u003e\u003cp\u003eDue to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle's electrical system. It's the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBantamX Touchscreen for Uni with 84 Inch battery cables\u003c\/li\u003e\n\u003cli\u003eFully programmable, digital controlled system\u003c\/li\u003e\n\u003cli\u003e8 circuits rated at 30 amps at 12.5 VDC per circuit\u003c\/li\u003e\n\u003cli\u003e16-position terminal block (easily attach accessories)\u003c\/li\u003e\n\u003cli\u003e2 controller ports (RJ45) for Ethernet cables\u003c\/li\u003e\n\u003cli\u003eIntegrated low voltage cutoff (LVCO) battery protection w\/ optional override\u003c\/li\u003e\n\u003cli\u003eOne ATM mini-style fuse for LVCO protection and reset\u003c\/li\u003e\n\u003cli\u003eFailsafe self-healing fault protection system (from 1.5 to 30amps)\u003c\/li\u003e\n\u003cli\u003eCurrent-sensing MOSFETs controlled by a microprocessor (no fuses and relays)\u003c\/li\u003e\n\u003cli\u003e50amp auto-resetting circuit breaker\u003c\/li\u003e\n\u003cli\u003eNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket\u003c\/li\u003e\n\u003cli\u003eOperates on 12VDC or 24VDC\u003c\/li\u003e\n\u003cli\u003e8-position input terminal block for controlling outputs\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth capabilities for remote control\u003c\/li\u003e\n\u003cli\u003eProtection against: overheating, over-current, shorts, reverse polarity and field collapse\u003c\/li\u003e\n\u003cli\u003eIgnition control and safety lock-out for switches 1 and 2 (optional)\u003c\/li\u003e\n\u003cli\u003eUp to 4 BantamX units can be daisy chained and controlled by one Touchscreen\u003c\/li\u003e\n\u003cli\u003eOn-demand wireless software updates\/upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eHardware:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePowder coated steel base w\/ built in hardware\u003c\/li\u003e\n\u003cli\u003eSilicone gasket for weatherproofing\u003c\/li\u003e\n\u003cli\u003eSimple thumb screw fastening aluminum lid with convenient silkscreened outlines for supplied legend placement\u003c\/li\u003e\n\u003cli\u003eUniversal and vehicle specific mounting options\u003c\/li\u003e\n\u003cli\u003eRobust insulated base and cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures Available Through sPOD Mobile App (free):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEach switch can be programmed for:\u003c\/li\u003e\n\u003cli\u003eDimming\u003c\/li\u003e\n\u003cli\u003eStrobe\u003c\/li\u003e\n\u003cli\u003eFlash\u003c\/li\u003e\n\u003cli\u003eMomentary\u003c\/li\u003e\n\u003cli\u003eSwitch Linking\u003c\/li\u003e\n\u003cli\u003eOn Road and Off Road mode of operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThe following features are only available through the purchase of our Pro-Series mobile App:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCircuit timers\u003c\/li\u003e\n\u003cli\u003eSwitch lockout\u003c\/li\u003e\n\u003cli\u003eInitial startup current for each circuit is raised to 65amps for 5 seconds\u003c\/li\u003e\n\u003cli\u003eProgram any circuit to be always on while still maintaining fault protection\u003c\/li\u003e\n\u003cli\u003eOption to disable deep sleep mode\u003c\/li\u003e\n\u003cli\u003eSelectable auto restart after circuit shuts down from over current\/short\u003c\/li\u003e\n\u003cli\u003eProgrammable Current Limiting (in 2amp increments up to 30amps)\u003c\/li\u003e\n\u003cli\u003eSelectable auto restart for current limiting shut down\u003c\/li\u003e\n\u003cli\u003eSelectable Latch or Momentary actions for inputs\u003c\/li\u003e\n\u003cli\u003eProgrammable ignition control for all 8 circuits\u003c\/li\u003e\n\u003cli\u003eVariable strobe function to create custom flash\/strobe patterns\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eExternal Controller Options (not included with system and can only be used in conjunction with an sPOD controller):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThird party switches\u003c\/li\u003e\n\u003cli\u003eComputers\u003c\/li\u003e\n\u003cli\u003eArduino\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi\u003c\/li\u003e\n\u003cli\u003eAlpine Audio systems KAC-001 head unit controller\u003c\/li\u003e\n\u003cli\u003eSensors, thermostats, pressure switches, fan controllers and more\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTouchscreen Control Panel\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eTouchscreen Benefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReduced installation time and labor allowing for mounting and connection of eight switches at one time versus individually.\u003c\/li\u003e\n\u003cli\u003eReduced wire harness complexity, using one harness to our controller to accommodate up to 32 circuits.\u003c\/li\u003e\n\u003cli\u003eReduced harness size offers an overall reduction in weight, improving the operational efficiency of the equipment.\u003c\/li\u003e\n\u003cli\u003eIncrease in switch lifecycle over traditional electromechanical switches.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTouchscreen Control Module Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVoltage feedback (vehicles battery\/alternator voltage)\u003c\/li\u003e\n\u003cli\u003eAmperage meter for each switch gives you the status of how much current each accessory is drawing\u003c\/li\u003e\n\u003cli\u003eBoard temperature feedback (shown on screen)\u003c\/li\u003e\n\u003cli\u003eCustomization: legends (3 lines of text)\u003c\/li\u003e\n\u003cli\u003eAutomatic backlighting off after 30 minutes of being inactivity\u003c\/li\u003e\n\u003cli\u003eAutomatic power off after 6 hours of being inactive or engine not running (Deep sleep mode)\u003c\/li\u003e\n\u003cli\u003eOne touch off function\u003c\/li\u003e\n\u003cli\u003eOne second hold on off button shuts all circuits down\u003c\/li\u003e\n\u003cli\u003eAutomatic system shut down when the touchscreen is unplugged\u003c\/li\u003e\n\u003cli\u003eBacklight dimming\u003c\/li\u003e\n\u003cli\u003eMultiple Source select (One touchscreen can control up to 32 circuits)\u003c\/li\u003e\n\u003cli\u003eCome with its own mounting bracket.\u003c\/li\u003e\n\u003cli\u003eBluetooth for use in programming the touchscreen.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe primary reason for the Bluetooth integrated into the Touchscreen is for programming purposes, and not for remote control due to the limited range.\u003c\/li\u003e\n\u003cli\u003eTouchscreen housings are precision machined billet aluminum which contributes to the distance limitations.\u003c\/li\u003e\n\u003cli\u003eRanges may vary from 5 feet up to 15 feet depending on the location of the Touchscreen, the surroundings, phone type, phone cover, and many other variables.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAdditional Touchscreen Mounting Options (sold separately):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRAM-201U Double Socket Arm for 1-inch RAM Ball (Must have this in order to mount touchscreen)\u003c\/li\u003e\n\u003cli\u003eRAM-238U Base with 1-inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)\u003c\/li\u003e\n\u003cli\u003eRAM-224-1U Suction Cup Base with 1-inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":53547368120504,"sku":"BXTSBUNI84-GNJV","price":930.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/4053\/5992\/files\/BXTSBUNI84_7-GNJV.jpg?v=1780592654"},{"product_id":"touchscreen-bantamx-vehicle-kit-toyota-2022-2026-tundra","title":"Touchscreen BantamX Vehicle Kit - Toyota 2022-On Tundra sPOD","description":"\u003cp\u003esPOD BantamX Touchscreen vehicle-specific kit for Toyota Tundra (22-on) has been designed specifically to integrate the sPOD Touchscreen panel into your cabin seamlessly while providing a safe place to access all your controls.\u003c\/p\u003e\u003cp\u003eDesigned to replace the in-cab sunglass holder, our plate has been specifically designed at the perfect angle to access switches easily.\u003c\/p\u003e\u003cp\u003eThe BantamX will save hours of wiring and installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12\/24VDC accessories.\u003c\/p\u003e\u003cp\u003eDue to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle's electrical system. It's the perfect overall solution for all your aftermarket electrical accessories with options unmatched by anyone.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFully programmable, digital controlled system\u003c\/li\u003e\n\u003cli\u003e8 circuits rated at 30 amps at 12.5 VDC per circuit\u003c\/li\u003e\n\u003cli\u003e16-position terminal block (easily attach accessories)\u003c\/li\u003e\n\u003cli\u003e2 controller ports (RJ45) for Ethernet cables\u003c\/li\u003e\n\u003cli\u003eIntegrated low voltage cutoff (LVCO) battery protection w\/ optional override\u003c\/li\u003e\n\u003cli\u003eOne ATM mini-style fuse for LVCO protection and reset\u003c\/li\u003e\n\u003cli\u003eFailsafe self-healing fault protection system (from 1.5 to 30amps)\u003c\/li\u003e\n\u003cli\u003eCurrent-sensing MOSFETs controlled by a microprocessor (no fuses and relays)\u003c\/li\u003e\n\u003cli\u003e100amp fuse\u003c\/li\u003e\n\u003cli\u003eNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket\u003c\/li\u003e\n\u003cli\u003eOperates on 12VDC or 24VDC\u003c\/li\u003e\n\u003cli\u003e8-position input terminal block for controlling outputs\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth capabilities for remote control\u003c\/li\u003e\n\u003cli\u003eProtection against: overheating, over-current, shorts, reverse polarity and field collapse\u003c\/li\u003e\n\u003cli\u003eIgnition control and safety lock-out for switches 1 and 2 (optional)\u003c\/li\u003e\n\u003cli\u003eUp to 4 BantamX units can be daisy chained and controlled by one Touchscreen\u003c\/li\u003e\n\u003cli\u003eOn-demand wireless software updates\/upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eHardware:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePowder-coated steel base w\/ built in hardware\u003c\/li\u003e\n\u003cli\u003eSilicone gasket for weatherproofing\u003c\/li\u003e\n\u003cli\u003eSimple thumb screw fastening aluminum lid with convenient silkscreened outlines for supplied legend placement\u003c\/li\u003e\n\u003cli\u003eUniversal and vehicle specific mounting options\u003c\/li\u003e\n\u003cli\u003eRobust insulated base and cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFEATURES AVAILABLE THROUGH sPOD MOBILE APP (free):\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEach switch can be programmed for:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDimming\u003c\/li\u003e\n\u003cli\u003eStrobe\u003c\/li\u003e\n\u003cli\u003eFlash\u003c\/li\u003e\n\u003cli\u003eMomentary\u003c\/li\u003e\n\u003cli\u003eSwitch Linking\u003c\/li\u003e\n\u003cli\u003eOn Road and Off Road modes of operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThe following features are only available through the purchase of our Pro-Series mobile App:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCircuit timers\u003c\/li\u003e\n\u003cli\u003eSwitch lockout\u003c\/li\u003e\n\u003cli\u003eInitial startup current for each circuit is raised to 65amps for 5 seconds\u003c\/li\u003e\n\u003cli\u003eProgram any circuit to be always on while still maintaining fault protection\u003c\/li\u003e\n\u003cli\u003eOption to disable deep sleep mode\u003c\/li\u003e\n\u003cli\u003eSelectable auto restart after circuit shuts down from over current\/short\u003c\/li\u003e\n\u003cli\u003eProgrammable Current Limiting (in 2amp increments up to 30amps)\u003c\/li\u003e\n\u003cli\u003eSelectable auto restart for current limiting shutdown\u003c\/li\u003e\n\u003cli\u003eSelectable Latch or Momentary actions for inputs\u003c\/li\u003e\n\u003cli\u003eProgrammable ignition control for all 8 circuits\u003c\/li\u003e\n\u003cli\u003eVariable strobe function to create custom flash\/strobe patterns\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEXTERNAL CONTROLLER OPTIONS:\u003c\/strong\u003e (not included with the system and can only be used in conjunction with an sPOD controller)\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThird-party switches\u003c\/li\u003e\n\u003cli\u003eComputers\u003c\/li\u003e\n\u003cli\u003eArduino\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi\u003c\/li\u003e\n\u003cli\u003eAlpine Audio systems KAC-001 head unit controller\u003c\/li\u003e\n\u003cli\u003eSensors, thermostats, pressure switches, fan controllers and more\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTOUCHSCREEN CONTROL PANEL\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e The touchscreen display will become inoperable if ambient temperatures drop below 20 degrees F. Let the temperature of the cab of the vehicle warm up before the operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTouchscreen Benefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReduced installation time and labor allowing for mounting and connection of eight switches at one time versus individually.\u003c\/li\u003e\n\u003cli\u003eReduced wire harness complexity, using one harness to our controller to accommodate up to 32 circuits.\u003c\/li\u003e\n\u003cli\u003eReduced harness size offers an overall reduction in weight, improving the operational efficiency of the equipment.\u003c\/li\u003e\n\u003cli\u003eIncrease in switch lifecycle over traditional electromechanical switches.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTouchscreen Control Module Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVoltage feedback (vehicles battery\/alternator voltage)\u003c\/li\u003e\n\u003cli\u003eAmperage meter for each switch gives you the status of how much current each accessory is drawing\u003c\/li\u003e\n\u003cli\u003eBoard temperature feedback (shown on screen)\u003c\/li\u003e\n\u003cli\u003eCustomization: legends (3 lines of text)\u003c\/li\u003e\n\u003cli\u003eAutomatic backlighting off after 30 minutes of being inactivity\u003c\/li\u003e\n\u003cli\u003eAutomatic power off after 6 hours of being inactive or engine not running (Deep sleep mode)\u003c\/li\u003e\n\u003cli\u003eOne touch-off function\u003c\/li\u003e\n\u003cli\u003eOne second hold on off button shuts all circuits down\u003c\/li\u003e\n\u003cli\u003eAutomatic system shut down when the touchscreen is unplugged\u003c\/li\u003e\n\u003cli\u003eBacklight dimming\u003c\/li\u003e\n\u003cli\u003eMultiple Source select (One touchscreen can control up to 32 circuits)\u003c\/li\u003e\n\u003cli\u003eCome with its own mounting bracket.\u003c\/li\u003e\n\u003cli\u003eBluetooth for use in programming the touchscreen.\u003cul\u003e\u003cli\u003eThe primary reason for the Bluetooth integrated into the Touchscreen is for programming purposes, and not for remote control due to the limited range. Touchscreen housings are precision machined billet aluminum which contributes to the distance limitations. Ranges may vary from 5 feet up to 15 feet depending on the location of the Touchscreen, the surroundings, phone type, phone cover, and many other variables.\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":53502684397752,"sku":"870089-GNJV","price":1104.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/4053\/5992\/files\/870089-GNJV.jpg?v=1780592339"},{"product_id":"touchscreen-bantamx-kit-toyota-4runner-2025-2026","title":"Touchscreen BantamX Kit 2025-On Toyota 4Runner sPOD","description":"\u003cp\u003eThe sPOD BantamX Touchscreen Vehicle-Specific Kit for the 2025 Toyota 4Runner is designed to seamlessly integrate the sPOD Touchscreen control panel into the vehicle's cabin, providing a centralized and convenient place for accessory controls.\u003c\/p\u003e\u003cp\u003eThe touchscreen\/Bantam system is ideal for those who want to match the 4Runner's in-cabin LCD display, and fits all Toyota 4Runner trim models ensuring easy access to controls within arm's reach.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe BantamX power module offers eight power circuits, each supporting 30A per channel, 100A total.\u003c\/li\u003e\n\u003cli\u003esPODConnect Bluetooth technology allow users to program and control their accessories from any iOS or Android device via the sPOD app.\u003c\/li\u003e\n\u003cli\u003eIntegrated LVCO low-voltage cutoff battery protection that monitors and protects, ensuring your vehicle's electrical system remains reliable and secure.\u003c\/li\u003e\n\u003cli\u003eInput Control - full control over accessories, allowing to integrate factory wiring to take control a step further.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eThe BantamX Touchscreen setup includes the following:\u003c\/span\u003e\u003c\/strong\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e(1x) BantamX System\u003c\/li\u003e\n\u003cli\u003e(1x) 36 inch Battery Cable Set\u003c\/li\u003e\n\u003cli\u003e(1x) Touchscreen Switch Panel \u003c\/li\u003e\n\u003cli\u003e(1x) Ethernet Cable \u003c\/li\u003e\n\u003cli\u003e(1x) Mounting Bracket \u003c\/li\u003e\n\u003cli\u003eAll necessary hardware \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":53502686167224,"sku":"87-0042-GNJV","price":1169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/4053\/5992\/files\/87-0042-GNJV.jpg?v=1779642237"},{"product_id":"2024-2026-toyota-tacoma","title":"24-On Toyota Tacoma Touchscreen BantamX Kit sPod","description":"\u003cp\u003eThe sPOD BantamX Touchscreen Vehicle-Specific Kit for the 2024-on Toyota Tacoma is designed to seamlessly integrate the sPOD Touchscreen control panel into the vehicle's cabin, providing a centralized and convenient place for accessory controls.\u003c\/p\u003e\u003cp\u003eThe touchscreen\/Bantam system is ideal for those who want to match the Tacoma in-cabin LCD display, and fits all Toyota Tacoma trim models ensuring easy access to controls within arm's reach.\u003c\/p\u003e\u003cp\u003eThe BantamX power module offers eight power circuits, each supporting 30A per channel, 100A total.\u003cbr\u003esPODConnect Bluetooth technology allow users to program and control their accessories from any iOS or Android device via the sPOD app.\u003cbr\u003eIntegrated LVCO; low-voltage cutoff battery protection that monitors and protects, ensuring your vehicle's electrical system remains reliable and secure.\u003cbr\u003eInput Control - full control over accessories, allowing to integrate factory wiring to take control a step further.\u003cbr\u003eThe BantamX Touchscreen setup includes the following:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e(1x) BantamX System\u003c\/li\u003e\n\u003cli\u003e(1x) 36 inch Battery Cable Set\u003c\/li\u003e\n\u003cli\u003e(1x) Touchscreen Switch Panel\u003c\/li\u003e\n\u003cli\u003e(1x) Ethernet Cable\u003c\/li\u003e\n\u003cli\u003e(1x) Mounting Bracket\u003c\/li\u003e\n\u003cli\u003eAll necessary hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":53502686199992,"sku":"870037-GNJV","price":1169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/4053\/5992\/files\/870037_1-GNJV.jpg?v=1779642243"}],"url":"https:\/\/omahabravodesigns.com\/collections\/spod-bantamx-touchscreen.oembed","provider":"OmahaBravo Designs","version":"1.0","type":"link"}